How to get started with your EON™ 100/120d

Congratulations on your new EON 100/120d and welcome to the Dolphin family! Getting started is easy: Connect the charger to the robot. Plug the charger into an electrical outlet. Charge it until all 3 bars are solid green. Make sure the robot is fully charged before getting started! Disconnect the charger from the robot and the outlet.

Let's get connected! Download the Maytronics One app you can connect via Bluetooth and 2.4 GHz Wi-Fi Only. The robot does not stay connected to Wi-Fi + Bluetooth while operating in the water.

Press the power button for 3-5 seconds to enable Bluetooth pairing, then proceed to pair your robot.

If prompted, complete the software update (as noted on the sticker).

Follow the steps in the app, including adding your Pool Features. Once you are connected and your Pool Features have been added, go to Cleaning Modes and select Smart Mode to start the calibration scan.

During the first Smart Mode cycle, the robot will scan your pool and create a customised cleaning program tailored to your pool’s shape and features!

Place the robot in the water. Within 30 seconds, it will automatically begin cleaning.

Start the robot on the pool floor for optimal cleaning results. At the end of the scan and the Smart Mode cycle, once you remove the robot and are connected to the app, it will show the suggested cycle, cycle time, and scanning pattern.

That’s it!

Sit back, relax, and enjoy your sparkling clean pool.