Congratulations on your new EON 100/120d and welcome to the Dolphin family! Getting started is easy: Connect the charger to the robot. Plug the charger into an electrical outlet. Charge it until all 3 bars are solid green. Make sure the robot is fully charged before getting started! Disconnect the charger from the robot and the outlet.

Let's get connected! Download the Maytronics One app you can connect via Bluetooth and 2.4 GHz Wi-Fi Only. The robot does not stay connected to Wi-Fi + Bluetooth while operating in the water.

Press the power button for 3-5 seconds to enable Bluetooth pairing, then proceed to pair your robot.

If prompted, complete the software update (as noted on the sticker).

Follow the steps in the app, including adding your Pool Features. Once you are connected and your Pool Features have been added, go to Cleaning Modes and select Smart Mode to start the calibration scan.

During the first Smart Mode cycle, the robot will scan your pool and create a customised cleaning program tailored to your pool’s shape and features!

Place the robot in the water. Within 30 seconds, it will automatically begin cleaning.

Start the robot on the pool floor for optimal cleaning results. At the end of the scan and the Smart Mode cycle, once you remove the robot and are connected to the app, it will show the suggested cycle, cycle time, and scanning pattern.

That’s it!

Sit back, relax, and enjoy your sparkling clean pool.

Maytronics One App: The Maytronics One App lets you easily control your Dolphin EON 100/120d. You can choose the cleaning modes and scanning type, set your preferred parking wall, schedule weekly cleanings, check the filter level status, and water temperature, all while the robot is out of the water.

UltraRun™: UltraRun™ is a cleaning scheduler that lets you keep your robot in the pool up to a week for the EON 100 and up to 2.5 weeks for the EON 120d before recharging. It’s easy to set: you can do it directly on the robot interface or through the Maytronics One app to tailor the scanning and cleaning modes to your specific pool requirements.

Steps Jet Cleaning: Eon robots use JETIQ™ technology and dual-drive brushes to climb and clean steps. This feature works in the Full, Ultra-Clean Coverage, and UltraRun™ cycles up to one week.

Homing Wall: With the Homing feature, the EON 100/120d parks at your preferred wall after each cleaning cycle, including during UltraRun™ cycles. You can easily set or change the Homing Wall in the app!

Clicker: The EON 120d includes the Clicker to help pick up and remove the robot from the pool more easily! The EON 100 is compatible with the Clicker as an optional accessory if you’d like to add this feature.